ERP Guides

Warehouse operations guide

How to Set Up Warehouse Management: Locations, Receiving and Picking

Warehouse management means tracking which shelf an item is on, in what quantity and under which document, from the moment it arrives until it is dispatched. When the location plan, receiving checks, picking sequence and transfer records are not set up together, the quantity in the system drifts from what is on the shelf. This guide covers the steps for setting up warehouse discipline and keeping daily operations on record; count preparation and variance handling are covered in the inventory management and stocktaking guide.

Warehouse overview

Today at a glance

148 Defined shelves
12 Open picks
04 Blocked items

Illustrative figures. The view can be filtered by warehouse, zone and item group.

Three basic decisions

Define locations first, then movements, then controls

Locations

Warehouse, zone, shelf and bin codes show exactly where an item sits.

Movements

Receipts, issues, transfers, returns and scrap are posted on one document pattern at the time they happen.

Controls

Blocks, quarantine and count records separate how much stock is genuinely available.

Shelf and location structure

Build shelf codes around how items actually move

Coding rules

  • Code the warehouse by zone, aisle, shelf and bin, and make the code match the label on the shelf exactly.
  • Place fast-moving items close to the picking and dispatch area.
  • Reserve floor space for heavy and palletised goods and bin shelving for small parts.
  • Define separate areas for quarantine, quality hold, returns and damaged goods.
  • State the unit of measure and pack size (box, case, pallet) the same way on the item record and the shelf label.

A code kept in memory cannot be found

If shelf locations live only in the memory of the warehouse owner, an authorised or new colleague cannot find the item; picking either slows down or happens from the wrong shelf. Coding must be written, labelled and visible in the system.

If an item must sit in more than one place, write down the primary and overflow rule so picking starts from the primary location.

Goods receipt

Match incoming goods with the order, dispatch note and shelf record

  1. 01

    Compare the document with the order

    Check that item, quantity, unit and variant on the dispatch note match the purchase order. Record any difference before accepting the delivery.

  2. 02

    Carry out quality and block checks

    Do not add items awaiting inspection to available stock; route them to quarantine and define who may release them.

  3. 03

    Assign a location and put away

    Follow the location the system proposes. If the item goes elsewhere, update the record at the same time rather than at the end of the day.

  4. 04

    Enter batch and serial details

    Record batch, serial or expiry details on receipt. Waiting to fill them in later breaks traceability and picking order.

Picking and dispatch

Plan picking by order due date and shelf sequence

  • Sort the pick list by order due date and pick urgent orders in a separate round.
  • A single round that follows shelf sequence reduces walking back down the same aisle.
  • For items with a batch or expiry date, pick the older batch first.
  • If the picked quantity is short, record the gap and its cause instead of silently closing the order.
  • After packing, verify item, quantity and label match in the dispatch check.

Dispatch, dispatch note and invoice links are detailed in the invoice and dispatch note guide.

Pre-dispatch check

1Order and dispatch note match
2Picked quantity and shortage check
3Batch, serial and expiry date
4Packaging, labels and parcel count
5Dispatch approval and vehicle details

Transfer discipline

Record internal moves as well

When an item moves from one shelf to another without a system record, an invisible gap opens between the two locations. Internal moves, inter-warehouse transfers and returns should follow the same document pattern.

Four transfer rules

Link the issue and receipt legs to the same document.
Post at the time of the move; batch entry at day end magnifies variances.
Keep the person entering the transaction separate from the approver.
Keep returns, scrap and damage as separate movement types.

Example case

120 in the system, 96 on the shelf

One item sits as 80 on the primary shelf and 16 on the overflow shelf, while the system shows 120. The first reflex should not be an adjustment. Check open picks, unposted transfers, the returns shelf and damaged goods first; recount if the gap remains.

Holding one item in two locations is not a mistake by itself; it becomes a variance when the rule and picking order are not written down.

Check sequence when tracing a gap

1Open picking and packing tasks
2Unposted receipts and transfers
3Returns, quarantine and damage area
4Nearby shelves and wrong location records
5Second count and approved adjustment

The software scope of the warehouse management solution that keeps location, movement and block records on one screen is described on the product page.

Ongoing control

Use counting to test the warehouse setup

Counting is not only a year-end obligation; it shows whether shelf codes, picking order and transfer records actually work. Decide how often each item is counted, and review movement history together with nearby locations when a shelf shows a gap. Count preparation, cutoff time and approved adjustments are covered in a separate guide.

01

Fast-moving items

Items picked and moved often are where posting errors accumulate.

02

Multi-location items

For items with primary and overflow locations, verify the picking order separately.

03

Shelves with recurring gaps

A gap that repeats on the same shelf calls for a location and label review, not just more counting.

Common mistakes

Four habits that widen the gap

Assigning shelf codes later

If coding happens after items are put away, labels, system and physical position stop matching.

Receiving without matching the order

Over, short or wrong deliveries enter stock unnoticed, and the correction often surfaces after a sale.

Posting transfers in a batch at day end

An item visible on two shelves during the day misleads picking lists and counts.

Keeping blocked stock as available

If stock under quality hold or damaged goods stay sellable, the risk of shipping a faulty item to a customer rises.

Frequently asked questions

Which records should a warehouse setup start with?

Start with warehouse, zone, shelf and bin codes, plus the unit of measure and pack size each item is held in. Then define which document records each receipt, issue, transfer, return and block. Building picking lists or count schedules before these two steps tends to multiply variances from the outset.

How many warehouse and shelf codes are needed?

There is no fixed number; warehouse count, physical space and item variety decide it. The rule is that the code matches the label on the shelf and that the same item is not placed in arbitrary locations. If an item must sit in more than one place, document the primary and overflow locations.

Can warehouse management work without barcodes?

It can, but without scanning, receipts, picks and transfers are keyed manually, which raises the risk of wrong items and quantities. If barcodes are used, item, variant and shelf labels must first share the same code structure. Barcode setup is covered in a separate guide.

Which transactions should the warehouse owner approve?

Transactions that change stock value or availability should require approval, such as count adjustments, releasing a block, accepting returns and inter-warehouse transfers. Separating the approver from the person entering the transaction improves record reliability.

Did You Find This Page Useful?

Related content

Continue with guides, products and resources related to this topic.

Your privacy is important to us

We use cookies to improve your experience while visiting our site, provide our services, and fulfill our legal obligations. Click for more information.